Dinan F10 M5 Performance Upgrades

HG Performance Dinan Dinan offers a broad range of BMW performance products from engine, driveline and chassis tuning components to complete Dinan Signature Vehicles and special Factory Works programs. As a serious BMW Tuner, Dinan’s objective is to offer complete performance solutions for the entire range of BMW models. They believe that every BMW driver deserves the opportunity to get the most from their car.   HG Performance Dinan F10 coilover Benefits of Dinan’s Performance Coil-Over Suspension System:

  • Front and rear springs designed to fit into the stock mounts for quiet operation.
  • Up to 1.25″ of lowering is possible depending on tire clearance although .75″ drop is recommended to maintain ride quality.
  • Spring rates are 15% stiffer for both front and rear.
  • Substantial reduction in body roll.
  • Threaded collars allow easy and precise front & rear vehicle height adjustments.
  • Included suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort.
  • Dinan-spec progressive bump stops improve ride quality at lowered ride heights.
  • Components are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection.
  • Compatible with BMW EDC shocks.

HG Performance Dinan F10 intake

Benefits of Dinan’s Performance Cold Air Intake System:

  • 627 HP and 616 lb-ft of Torque when combined with the D-Tronics Performance Tuner and exhaust. A difference of 17 HP and 11 lb-ft of torque from Dinan Stage 1 (D-Tronics Performance Tuner Only).
  • Dinan proprietary Injection molded Dinan MAF housings are larger than stock
  • Stock air filters are replaced with 77% larger Dinan conical air filters.
  • Entire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.
  • Stock System Stays Completely Functional
  • Carbon fiber air box lids and intake ducts
  • Raised Dinan logos are laminated into the carbon fiber intake
  • Rubber hoses, mountain brackets, & hardware included.

HG Performance Dinan F10 antiroll bar Benefits of the F10 M5 Lightweight Tubular Adjustable Front Anti-Roll Bar:

  • Less Body Roll
  • More Mechanical Grip
  • More Stable At Limit
  • Large 28mm size (stock bar is 24.5mm)
  • 2 hole bar with 3 possible positions on bar & adjustable length end links
  • Lightweight – 44% lighter than a solid anti-roll bar of comparable stiffness
  • Only tubular anti-roll bar with a large range of adjustment on the market
  • Tubular (Hollow) Construction
HG Performance Dinan F10 antiroll bar rear
Benefits of the F10 M5 Lightweight Tubular Adjustable Rear Anti-Roll Bar:
  • Less Body Roll
  • More Mechanical Grip
  • More Stable At Limit
  • Large 22mm size (stock bar is 21.5mm)
  • 3 hole bar with 3 possible positions on bar
  • Lightweight – 29% lighter than a solid anti-roll bar of comparable stiffness
  • Only tubular anti-roll bar with a large range of adjustment on the market
  • Tubular (Hollow) Construction

HG Performance Dinan F10 Camber control arm Benefits of the Negative Camber Control Arms for F10 M5, F12/13 M6: 

  • Replaces front upper control arms with ones that increase negative camber by -0.3° in the M5 and -0.6° in the M6
  • Improves grip of front tires
  • Evens out tire wear during aggressive cornering